Honeywell CM907 User Manual

12
13
FINE TUNING THE CM907
Changing the User Parameters
The user mode allows you to modify some basic settings of the thermostat to meet
your personal preferences. You can change the time display format (24hr or AM/PM),
reset the heating program to the built-in settings and disable or enable the summer/
winter time change feature.
To change any of these user’s parameters:
a. Move the slider switch to the OFF position, then press and hold the
button for
approximately 5 seconds. button for approximately 5 seconds.
b. Once entered the following information will be shown on the screen:
COPY
DAY
DAY
1..6
CM907
DATE
PROG
AUTO
MAN
OFF
OFF

Honeywell CM907 Specifications

General

Programming	7-day programmable
Temperature Control	Electronic
Power Source	Battery
Mounting	Wall Mounted
Control Mode	On/Off
Switching Action	SPDT (Single Pole Double Throw)
Temperature Setting Range	5°C to 35°C
Power Supply	2 x AA Alkaline Batteries
Holiday Mode	Yes
Optimum Start	Yes
Accuracy	±0.5°C
Battery Backup	Yes
Type	Programmable Thermostat
Display	LCD
Temperature Display Range	0°C to 40°C
Number of Time Periods	6 per Day
Frost Protection	Yes
Voltage	230V AC
Switching Current	8A Resistive, 3A Inductive