Honeywell CM907 User Manual

14
15
FAQ’s & TROUBLESHOOTING
Can I use my CM907 to control my air-conditioning system?
Yes, if your system has been set up correctly you can use your thermostat to control
the cooling. To switch the thermostat between heating and cooling modes press
the
or
buttons together for 5 seconds in any of the product operating modes
(AUTO, MAN or OFF). The text ‘COOLING’ will be displayed for a moment on the
screen to indicate the cooling operation is now active. The factory default program
for cooling is specied in the table below, but this can be modied in the same way
as the default heating program:
Monday to Friday
Period 1 2 3 4 5 6
Time 6:30 8:00 12:00 14:00 18:00 22:30
Temperature 24°C 28°C 24°C 28°C 24°C 24°C
Saturday & Sunday
Period 1 2 3 4 5 6
Time 8:00 10:00 12:00 14:00 18:00 23:00
Temperature 24°C 24°C 24°C 24°C 24°C 24°C
If something happens to my heating system how can I check that the thermostat
is working?
Refer to the Troubleshooting Guide on page 17. If you still need assistance after this
call your installer. The thermostat should only be opened or removed by a qualied
professional to prevent possible injury from electric shock and/or damage to the
product.

Honeywell CM907 Specifications

General

Programming	7-day programmable
Temperature Control	Electronic
Power Source	Battery
Mounting	Wall Mounted
Control Mode	On/Off
Switching Action	SPDT (Single Pole Double Throw)
Temperature Setting Range	5°C to 35°C
Power Supply	2 x AA Alkaline Batteries
Holiday Mode	Yes
Optimum Start	Yes
Accuracy	±0.5°C
Battery Backup	Yes
Type	Programmable Thermostat
Display	LCD
Temperature Display Range	0°C to 40°C
Number of Time Periods	6 per Day
Frost Protection	Yes
Voltage	230V AC
Switching Current	8A Resistive, 3A Inductive