EasyManua.ls Logo

Honeywell COMBISAFE - Barrier Box Handling and Care; Annual Inspection and Storage; Repairs and Scrapping

Honeywell COMBISAFE
45 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
Handling SMB System C
The barriers weighted up to 19.5
kg can be handled by one person,
but it is recommended for frequent
loading and unloading to be carried
out by two persons or to use lifting
equipment. Don’t move or lift box
by hand.
Refer to current Health and safety
regulations applicable to country
of use to ensure compliance.
Safety precaution.
Before every use
Always check the barrier boxes
for any sign of damage or visible
deformation.
Don’t use boxes that don’t pass
checks according to the following
checklist:
Crack free and notch free welds
Deformation
Corrosion
Damage
Wearing
Visible Combisafe marking plate
and ID number
Deformed or damaged lifting
eyes
No sharp edges
If in doubt, consult Combisafe!
Annual inspection
It is recommended that the box
is inspected at least once a year
by a trained person unless stated
otherwise in country of use.
Storage
Store the Barrier Box in a dry and
well ventilated place, protected
from the weather and from all
corrosive substances.
Repairs
May only be carried out by the
manufacturer.
Scrapping
When the Barrier boxes have failed
their safety inspection, they may
be used as scrap steel and can be
recycled as raw material

Related product manuals