Set Current Time and Day
Press once; press Time until current time is displayed. Press again; press Time until current
day is displayed. Press .
Heating Program
Set System switch to Heat. Press once. Press Time and Temp to program WAKE for Mon. - Fri.
Repeat for LEAVE, RETURN and SLEEP.
Press until Sat. - Sun. appear in display . Press Time and Temp to program WAKE for Sat. - Sun.
Repeat for SLEEP.
After programming is finished, Press .
Cooling Program
Set System switch to Cool. Repeat each step in the Heating Program to set cooling program.
Model CT3200 Programming Quick Guide
Set
Clock/Day
Ahead
Back
Set
Clock/Day
Set
Schedule
Ahead
Back
Ahead
Back
For additional information refer to the Programming and Installation Instructions or contact Honeywell Customer Relations at
www.honeywell.com/yourhome or 1-800-468-1502.
Warmer
Cooler
Set
Schedule
Ahead
Back
Warmer
Cooler
69-1548 6/01 Copyright © 2001 Honeywell Printed in USA
Program the CT3200 Thermostat before or after the thermostat is mounted to the wall.
Simply insert batteries (see Installation Quick Guide) to activate.
Open thermostat cover to access programming buttons and system switches.
Set
Schedule
Set
Schedule
To Previous Page
Loading...
