Why is the 'Defrost' light on my Honeywell DH45W Dehumidifier illuminated?
The 'Defrost' light on your Honeywell Dehumidifier illuminates when the temperature of the room is too low. The dehumidifier may not work effectively in low-temperature environments. Increase the temperature of the room or wait until the temperature increases to use the dehumidifier.
Why does frost appear on the coils of my Honeywell Dehumidifier?
Frost appearing on the coils of your Honeywell Dehumidifier is normal if the dehumidifier has been recently turned on in low room temperatures (usually below 41°F (5°C)). The frost will disappear in an hour or so after the dehumidifier is switched OFF.
What to do if the 'Water Tank Full' light is on and the Honeywell Dehumidifier is beeping?
If the 'Water Tank Full' light is illuminated and your Honeywell Dehumidifier is beeping, the water tank is likely full; empty it. Also, ensure the water tank is correctly positioned in the unit, as the unit will not operate until the tank is securely in place.
What to do if water is on the floor near my Honeywell DH45W?
If you find water on the floor near your Honeywell dehumidifier, check the connections between the garden hose/drain hose and the drain outlet on the unit to ensure they are secure. If you intend to use the water tank, disconnect the hose and replace the rubber stopper and drain cap.
Why does my Honeywell DH45W Dehumidifier run constantly and not stop?
General| Model | DH45W |
|---|---|
| Dehumidification Capacity | 45 pints per day |
| Noise Level | 51 dB |
| Continuous Drain Option | Yes |
| Auto Restart | Yes |
| Filter Type | Washable |
| Auto Shut-off | Yes |
| Continuous Drainage | Yes |
| Operating Temperature | 41°F to 89°F |
| Humidity Control | Adjustable |
Overview of the dehumidifier's control panel buttons and displays for operation.
Instructions for setting the auto-on and auto-off timer functions for convenience.
Procedures for emptying the water tank and continuous drainage options.
Guidelines for appliance cleaning, dust filter maintenance, and storage.
Explanation of the unit's ability to resume settings after a power interruption.
To Next Page
