Turning the Device On/Off
Press the Power key to turn the terminal ON.
Press and hold the Power key for approximately 5 seconds to turn the
terminal OFF .
Note: You should always turn the device OFF before removing the battery.
Suspend Mode
The terminal automatically enters Suspend Mode when the device is inactive
for a programmed period of time.
Press the Power or SCAN key to wake the terminal from Suspend Mode.
Removing the Battery Pack
1. Turn the terminal OFF and release the hand strap.
2. Unlock the battery.
3. Wait three seconds, then slide the battery release button away from the
stylus slot.
4. Remove the battery.
To Next Page
Loading...
