6
Removing the Main Battery Pack
When removing a battery from the terminal, put the device
in Suspend Mode (see page 7) before removing the
battery door. Once the battery door is removed, wait at
least 3 seconds before removing the main battery. This
process allows the device to shut down properly and
maintains memory during the battery swap.
Battery Error Notification
If your terminal displays the following indicators, replace
the battery with a Honeywell Li-poly or Li-ion battery pack.
• appears in the Title bar at the top of the touch panel
display.
• The General Notification LED flashes red.
• A Notification appears on the Tile bar at the bottom of
the touch panel display.
99EX_QS.book Page 6 Friday, March 4, 2011 2:42 PM
To Next Page
Loading...
