7
Suspend Mode
The terminal goes into Suspend Mode automatically when
the terminal is inactive for a programmed period of time.
You can program this time on the Advance tab of the
Power System Setting. For additional information, refer to
the
Dolphin 99EX User’s Guide
located on the Web at
www.honeywellaidc.com.
To put the terminal into Suspend Mode manually, press
the Power key and the screen goes blank.
To wake the terminal from Suspend Mode, press the
Power key or SCAN key .
Note: You should always put the terminal in suspend mode before
removing the battery door. For information on how to
remove the battery see page 6.
99EX_QS.book Page 7 Friday, March 4, 2011 2:42 PM
To Next Page
Loading...
