Honeywell DT435T - Tamper Loop

Sensors TAMPER LOOP
TAMPER LOOP
94
www.honeywell.com/security
EMPS-10
8mm Diameter Recessed Contact
with Tamper Loop
• 30cm (12") lead length
• Standard gap: 12mm (1/2")
• Tamper Loop for added security
• Package 1 per bag
ALSO AVAILABLE:
EMPS-10W
– White
EMPS-10B – Brown
By adding a special tamper loop to the existing alarm circuit, this four-wired configuration makes it
difficult for potential intruders to tamper with the system—providing an added level of security.
944CE-WH
8mm Diameter Recessed
Contact with Tamper Loop
• 3m (10ft.) jacketed leads
• Standard gap 25mm (1")
• Tamper Loop for added security
• Packaged 5 per bag
PAL-CE-WH
Surface Mount Contact with
Tamper Loop• 3m (10ft.)
jacketed leads
• Standard gap 28mm (1-1/8")
• Tamper Loop for added security
• Packaged 5 per bag
EMPS-50
Overhead Door Contact with Tamper Loop
• 62cm (24") armored cable
• Standard gap: 5.5cm (2")
• Complies with EN50131-1 (Grade 2, Class II)
• Rugged aluminum housing
• Tamper Loop for added security
• Package 1 per bag
EN50131-1
EMPS-70
20mm Diameter Recess Contact with Tamper Loop
• Complies with ENS0131-1 (Grade 2, Class II)
• 30cm (12") lead length
• Standard gap: 20mm (3/4")
• Tamper Loop for added security
ALSO AVAILABLE:
EMPS-70W
– White
EMPS-70B – Brown
EN50131-1