Honeywell DT8016MF4 DUAL TEC User Manual

DT8016MF4 / DT8016MF5 DUAL TEC
®
Motion Sensor – Installation Instructions
QUICK LINKS
Mounting Location Guidelines
Open the Sensor
Mount the Sensor
Sensor Components and Settings
Wire the Sensor
Wiring Examples
Walk Test the Sensor
Detection Patterns
Remote LED Enable
Relay Operation
Troubleshooting
Sensor Specifications
Accessories
Approval Listings
Mounting location guidelines:
• The maximum range is obtained at a mounting height
of 2.3m (7’ 6”).
• Allow a clear line-of-sight to all areas to protect.
• Do not directly face windows.
• Avoid close proximity to moving machinery, fluorescent lights, and
heating/cooling sources.
• Not for use in applications with pets.
1. Turn the arrow to point to the Unlock symbol.
2. Press firmly on housing latch.
3. Gently separate the front and rear housing.
[EN] = approved installation.

Honeywell DT8016MF4 DUAL TEC Specifications

General

Type	Motion Detector
Field of View	90°
Microwave Frequency	10.525 GHz
Operating Temperature	-10°C to +55°C (14°F to 131°F)
Detection Method	Microwave and PIR
Mounting Height	2.1m to 2.7m (7' to 9')
Operating Voltage	9V to 16V DC
Current Draw	25mA
Humidity Range	95% non-condensing
Alarm Relay	Form A

Summary

Select the Mounting Location

Mounting Location Guidelines

Mount the Sensor

Sensor Components and Settings

EOL Settings

Configuration of End-of-Line resistors for alarm, tamper, and fault.

Microwave Range Adjustment

Adjusting the microwave detection range for optimal performance.

Wire the Sensor

Wiring Details

Instructions on connecting sensor wires and terminal functions.

Walk Test and Adjustment

Walk Test Procedure

Detection Patterns

Troubleshooting

Trouble Conditions and Resolutions

Identifies common trouble conditions and provides corrective actions.

Specifications

Sensor Performance Specifications