Need help?Do you have a question about the Honeywell DT8050 Dual Tec and is the answer not in the manual?
General| Coverage Area | 50 ft x 40 ft |
|---|---|
| Microwave Frequency | 10.525 GHz |
| Humidity Range | 5% to 95% non-condensing |
| Type | Dual Technology Motion Detector |
| Technology | PIR and Microwave |
| Detection Method | PIR, Microwave |
| Detection Range | Up to 50 feet (15.2 meters) |
| PIR Range | Up to 50 feet (15.2 meters) |
| Voltage Range | 9-15VDC |
| Power Supply | 12 VDC |
| Current Consumption | 25mA |
| Current Draw | 25 mA typical |
| Alarm Relay | Form A Relay |
| Tamper Switch | Normally Closed (NC) |
| Mounting Height | 2.3 m |
| Temperature Range | -10°C to +55°C |
| Operating Temperature | -10°C to +55°C |
Illustrates recommended mounting positions for optimal sensor performance.
Details the sensor's terminal block layout and screw types for secure connections.
Diagrams the sensor's connection points for power, alarm, and tamper functions.
Explains how to adjust the microwave detection range using a sensitivity dial.
Details the procedure for activating and using walk test mode to verify detection.
Describes the meaning of different LED colors and flash patterns during operation.
Provides top and side view diagrams illustrating the sensor's detection field.
Details on configuring specific detection zones and the look-down feature.
Lists operating temperature, humidity, and other environmental parameters.
Guides users through identifying and resolving common sensor operational problems.
Lists industry standards and certifications the sensor complies with.
Presents FCC and Industry Canada statements regarding device operation and interference.
To Next Page