About this Technical Documentation 2
2 About this Technical Documentation
2.1 About the Documentation on Hand
This technical documentation is part of the enCore FC1 manual; it briefly
describes the properties of the enCore FC1 flow computer being relevant for
the use of the device in legal metrology.
It comprises the general device description, technical data, display and
operation of the device as well as a brief description of basic functions and the
essential AFBs. The appendix contains the EU type examination certificate
and other legally relevant documents.
Thus, the documentation on hand is not only an introductory summary for all
users but also intended for all interested parties such as approval authorities
and notified bodies.
In the following, the short name ‘FC1’ is mostly used for the term ‘enCore
FC1’.
All safety information is contained in the “Operating Instructions”
volume of the FC1 manual).
The documentation on hand (“Instructions for Use in Legal
Metrology”) does not include any safety information.
Please read the “Instructions for Use in Legal Metrology” and the
“Operating Instructions” volumes of the manual carefully and
completely before starting to work with the FC1, especially prior to
installation.
The manufacturer does not assume any liability for damage and
failures caused by disregard of the manual.
To Next Page
Loading...
Need help?
General
