Honeywell Enraf VITO User Manual

Introduction VITO Interface and average temperature
probes
___________________________________________________________________________
Instruction manual VITO Page 6
1 Introduction VITO Interface and average temperature probes
An average temperature probe is to be connected to the Honeywell Enraf 762 VITO Interface unit. In turn, the 762
VITO Interface unit is connected to the Honeywell Enraf level gauge. A water bottom probe can be integrated in
the average temperature probe (combi probe).
Figure 1.1 Average temperature probe / VITO Interface configuration
There are three types of VITO Interface units; each for a specific type of average temperature probe:
• 762 VITO MTT Interface for:
- model 764 VITO average temperature probe, or
- model 766 VITO combi probe (average temperature probe with integrated water probe), or
- model 765 VITO water probe.
• 762 VITO LT Interface for:
- model 767 VITO LT average temperature probe, or
- model 768 VITO LT combi probe (average temperature probe with integrated water probe), or
- model 765 VITO water probe.
• 762 VITO MRT Interface for:
- MRT temperature probe (Multiple Resistance Thermometer), or
- MPT temperature probe (Multiple Pt100 spot Thermometer), or
- 2 to 3 individual wired spot elements.

Honeywell Enraf VITO Specifications

General

Brand	Honeywell
Model	Enraf VITO
Category	Temperature Controller
Language	English