F50F AND F300E ELECTRONIC AIR CLEANERS
69-0756—05 10
Replacing electronic air cleaner components
1. Inspect the cell(s) for broken ionizer wires and bent collector plates. Repair, as
necessary, or call your contractor for service.
2. Slide the prefilter(s) into the upstream prefilter guides.
3. Slide the air cleaner cell(s) in so the air flow arrow points downstream and the
handle(s) face outward.
4. Firmly close the access door.
5. Turn on the air cleaner. If the cell(s) and prefilter(s) are wet, the neon light may
not come on and you may hear arcing. If the arcing is annoying, simply turn the
air cleaner off for two to three hours or until the cell(s) are dry.
M3582
To Next Page
Loading...
Need help?
General
