EasyManuals Logo

Honeywell F300 User Manual

Honeywell F300
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
F50F AND F300E ELECTRONIC AIR CLEANERS
69-0756—05 14
BEFORE YOU CALL FOR SERVICE
If...
Then...
Electronic air cleaner doesn't seem to be working
1. Make sure the furnace or air conditioner blower is running.
2. Make sure the access door is firmly closed and latched. If door is not closed
properly, an interlock keeps the air cleaner off.
Arcing (snapping) seems too frequent
1. If the electronic cell(s) are wet from washing, turn the air cleaner off for two to
three hours.
2. Check the cell(s) for broken ionizer wires or bent plates. Repair if necessary.
3. Wash cell(s) and prefilter(s) if dirty.
Neon light on air cleaner does not come on
1. Make sure the furnace or air conditioner fan is running.
2. Make sure the access door is firmly closed.
3. Make sure the On-Off switch is in the On position.
4. On models without the Solid State Performance Indicator, if the electronic cell(s)
are wet, check again in two to three hours.
You smell ozone and find it objectionable
Call your heating and air conditioning dealer.

Other manuals for Honeywell F300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Honeywell F300 and is the answer not in the manual?

Honeywell F300 Specifications

General IconGeneral
TypeElectronic Air Cleaner
Voltage120V
Filter TypeElectronic
Warranty5 year limited warranty
Collection CellAluminum
Pre-filterWashable
Wattage15W

Related product manuals