Need help?Do you have a question about the Honeywell FIRE-LITE ALARMS ES-200XP and is the answer not in the manual?
General| Model | ES-200XP |
|---|---|
| Type | Fire Alarm Control Panel |
| Operating Voltage | 24 VDC |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Humidity Range | 10% to 93% non-condensing |
| Zones | 198 addressable points |
| Battery Backup | Up to 18 AH batteries |
| Communication | Optional dialer or network interface |
| Compatibility | Compatible with Fire-Lite devices |
| NAC Circuits | 2 (Notification Appliance Circuits) |
| Dimensions | 14.5" (36.83 cm) H x 12.75" (32.39 cm) W x 3.5" (8.89 cm) D |
| Number of Zones | 198 addressable points using one signaling line circuit (SLC) |
Discusses IP, cellular, and telephone line signaling limitations.
Outlines requirements for separating power-limited and non-power-limited wiring.
Guides through enabling and configuring the communicator via panel or software.
Details how to enable and configure cellular as a communication path.
Provides steps for alarm, trouble, and supervisory event response.
To Next Page