Honeywell Gamewell-FCI ILI95-MB-E3 User Manual

CFI Security Inc.
1845 Northwestern, Suite B
El Paso, Texas 79925
Ph (915) 778-6061
Fax (915) 778-7046
Fire Alarm and Mass Notification
O&M Manual
TACTICAL EQUIPMENT MAINTENANCE FACILITY (TEMF)
FT BLISS EQUIPMENT MAINTENANCE FACILITIES (EMF)
FORT BLISS, TEXAS
Gamewell FCI Fire Alarm & Mass
Notification System

Honeywell Gamewell-FCI ILI95-MB-E3 Specifications

General

Input Voltage	24 VDC
Operating Temperature	32°F to 120°F (0°C to 49°C)
Weight	0.5 lbs (0.23 kg)
Description	ILI95-MB-E3 is an Intelligent Loop Interface Module for Gamewell-FCI E3 Series
Humidity Range	0% to 93% non-condensing
Certifications	UL, CSFM, MEA

Summary

Important Limitations

Smoke Detector Functionality and Limitations

Covers placement, sensing capabilities, density, and specific fire causes.

System Power Dependency and Maintenance

System requires power; inadequate maintenance is a primary cause of malfunction.

Installation Precautions

Power Disconnection and Re-acceptance Testing

Crucial steps include disconnecting power before servicing and testing after changes.

Survivability Requirements

Circuit Protection and Handling Precautions

NFPA 72 circuit protection, lightning transient mitigation, and static-sensitive component handling.

Section 1: System Overview

1.2 Standard Features

Details the core functionalities and capabilities of the E3 Series system.

1.3 System Components

1.5 Specifications

Section 2: Installation

2.3 Component Handling and Sub-assembly Mounting

Section 3: E3 Series System Connections

3.1 ILI-MB-E3 and ILI95-MB-E3 Connections

3.2 ILI-MB-E3 Wiring Diagrams

3.3 ILI95-MB-E3 Wiring Diagrams

Section 4: Programming/Operation Instructions

Section 5: Programming

Section 6: Power Up Procedure

6.1 General Power-Up Requirements

Outlines general steps and safety warnings before applying power to the system.

6.3 Automatic Configuration

Section 7: Test and Maintenance

7.1 System Testing Requirements

7.2 System Maintenance Recommendations

Recommends battery replacement every three years and returning sub-assemblies for service.

Section 8: Power-Limited – Non Power-Limited Wiring

8.1 E3 Series Control Panel Circuit Wiring Requirements

Details wiring requirements, including separation between power-limited and non-power-limited circuits.

8.2 E3 Series Power-Limited and Non Power-Limited Diagram

Illustrates the power-limited and non-power-limited wiring configurations for the control panel.