To Next PageTo Next Page
Need help?Do you have a question about the Honeywell Gamewell-FCI E3 Series and is the answer not in the manual?
General| Model | E3 Series |
|---|---|
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Type | Fire Alarm Control Panel |
| Communication | RS-485, Ethernet |
| Mounting | Wall Mount |
| Notification Appliance Circuits (NACs) | Up to 4 NACs |
| Display | LCD Display |
| Networking | Ethernet |
| Input Voltage | 120/240 VAC |
| Battery Backup | Yes |
| Humidity Range | 93% non-condensing |
| Dimensions | Varies by model |
| Weight | Varies by model |
Details the ILI-MB-E3 as the main operating sub-assembly with signaling line circuits.
Describes the ILI95-MB-E3, a main operating sub-assembly supporting signaling line circuits.
Provides electrical specifications for system components.
Lists electrical specifications for the PM-9 and PM-9G power supply sub-assemblies.
Describes signaling line circuit capabilities for ILI-E3/ILI95-E3 series.
Outlines essential requirements for proper system installation, including environment and mounting.
Step-by-step guide for installing the backbox for Cabinet A1.
Step-by-step guide for installing the backbox for Cabinet A2.
Guide for installing the backbox for the remote flush annunciator.
Guide for installing backboxes for 2-Bay and 3-Bay Cabinet A or AA.
Step-by-step guide for installing the backbox for Cabinet B.
Guide for installing sub-assemblies within the Cabinet B backbox.
Step-by-step guide for installing the backbox for the B-Slim Cabinet.
Guide for installing sub-assemblies onto the B-Slim-E3 Plate.
Step-by-step guide for installing the backbox for Cabinet C.
Guide for installing sub-assemblies onto the E3-INX-C plate in Cabinet C.
Guide for installing sub-assemblies onto the E3-INCC-C plate in Cabinet C.
Guide for installing sub-assemblies onto the E3-ILI-C plate in Cabinet C.
Guide for installing backboxes for Cabinet D with plexiglass or INX doors.
Guide for installing sub-assemblies onto the E3-INX-D plate in Cabinet D.
Guide for installing sub-assemblies onto the E3-INCC-D plate in Cabinet D.
Details electrical specifications and connections for ILI-MB-E3 and ILI95-MB-E3.
Details the 24 VDC signaling line circuits for ILI-MB-E3/ILI95-MB-E3.
Lists electrical specifications for the ILI-MB-E3 and ILI95-MB-E3.
Details connections for the Intelligent Loop Interface - Main Board (ILI-MB-E3).
Provides field wiring connections for the ILI-MB-E3 sub-assembly.
Illustrates the field wiring diagram for the ILI-MB-E3 sub-assembly.
Details connections for the Intelligent Loop Interface XP95 - Main Board (ILI95-MB-E3).
Details field wiring connections for the ILI95-MB-E3 sub-assembly.
Illustrates the field wiring diagram for the ILI95-MB-E3 sub-assembly.
Details connections for the Intelligent Loop Interface - Slave Board (ILI-S-E3).
Describes the 24 VDC signaling line circuits for the ILI-S-E3 slave board.
Lists field wiring connections for the ILI-S-E3 slave board.
Illustrates the field wiring diagram for the ILI-S-E3 sub-assembly.
Details connections for the Intelligent Loop Interface XP95-Slave Board (ILI95-S-E3).
Describes the 24 VDC signaling line circuits for the ILI95-S-E3 slave board.
Lists field wiring connections for the ILI95-S-E3 slave board.
Illustrates the field wiring diagram for the ILI95-S-E3 sub-assembly.
Specifies wiring requirements for ANX-SR, ANX-MR-FO, and ANX-MR-UTP.
Lists the field wiring connections for the ANX-SR sub-assembly.
Lists continued field wiring connections for the ANX-MR-UTP.
Illustrates the wiring diagram for the ANX-MR-UTP.
Lists field wiring connections for the ANX-MR-FO sub-assembly.
Illustrates the wiring diagram for the ANX-MR-FO.
Details wiring and specifications for power supply units.
Details AC power connection requirements for PM-9 and PM-9G.
Explains how to connect batteries to the PM-9/PM-9G power supply.
Lists electrical specifications for the PM-9 and PM-9G power supplies.
Provides field wiring connections for the PM-9 power supply.
Illustrates the wiring diagram for the PM-9 sub-assembly.
Provides field wiring connections for the PM-9G power supply.
Illustrates the wiring diagram for the PM-9G sub-assembly.
Details wiring connections for ASM-16, ANU-48, and INI-VG Series.
Illustrates wiring connections between ASM-16 and ANU-48 units.
Shows the field wiring connections for the ASM-16.
Lists field wiring connections for the DACT-E3.
Continues field wiring connections for the DACT-E3.
Lists field wiring connections for the RPT-E3.
Continues field wiring connections and jumper settings for RPT-E3.
Illustrates the field wiring diagram for the RPT-E3.
Lists field wiring connections for the ANU-48.
Illustrates the field wiring diagram for the ANU-48.
Lists field wiring connections for the LCD-E3.
Illustrates the field wiring diagram for the LCD-E3.
