Honeywell Gamewell-FCI E3 Series User Manual

10 E3 Series Installation/Operation Manual — P/N 9000-0574:I 11/04/10
Section 1: System Overview
1.1 Description
The Gamewell-FCI E3 Series
®
Expandable Emergency Evacuation System is a multiprocessor
based analog/addressable fire alarm control panel, designed for commercial, industrial and
institutional fire alarm applications. The E3 Series
®
is Listed by Underwriter’s Laboratories under
Standard UL 864, 9th Edition. It is suitable for the following signaling services:
• Automatic Fire Detector Alarm
• Manual Fire Alarm
• Waterflow Alarm
• Supervisory
• Automatic Smoke Alarm, non-coded and master coded operation
• Releasing Device Service
When the System is configured and installed under the supervision of a Gamewell-FCI factory
trained and certified distributor, the E3 Series complies with the requirements of the following
National Fire Protection Association (NFPA) Standards:
• NFPA 13 Installation of Sprinkler Systems
• NFPA 16 Deluge Foam - Water Sprinkler Systems
• NFPA 72 National Fire Alarm Code:
– Central Station Fire Alarm Systems
– Local Fire Alarm Systems
– Auxiliary Fire Alarm Systems
– Remote Station Fire Alarm Systems
– Proprietary Fire Alarm Systems
1.2 Standard Features
• Two (2), Class A, Style 6, 7* or Class B, Style 4 Signaling Line Circuits
• Two (2), Class A, Style Z or Class B, Style Y Notification Appliance Circuits, 2.0 amp each
• Alarm, Trouble and Supervisory dry contacts
• Accommodates 159 Gamewell-FCI Approved, UL
®
Listed compatible analog sensors per
signaling line circuit (ILI-MB-E3 or ILI-S-E3 only).
• Accommodates 159 Gamewell-FCI Approved, UL Listed compatible addressable
monitor/control devices per signaling line circuit (ILI-MB-E3 or ILI-S-E3 only)
• Accommodates 126 Gamewell-FCI Approved, UL Listed compatible sensors/modules
per signaling line circuit (ILI95-MB-E3 or ILI95-S-E3 only)
• 80-character alphanumeric LCD display (40 characters user-defined)
4100 event history buffer (non-volatile)
• Power-limited
• Resettable/non-resettable 2.0 amp @ 24 VDC power output each
• Alarm verification
• Walk test
• Multi-level alarm processing
• Positive Alarm Sequence (PAS) operation
• NAC coding
• Trouble reminder
• Integral RS-232 port
• ANX network interface communicates between the E3 Series fire alarm control panel and the
FocalPoint Graphic Workstation
*Style 7 operation requires System Sensor, M500X Isolator Module (ILI-MB-E3 or ILI-S-E3) or
XP95-LI Line Isolator and XP95-LIB Line Isolator Base (ILI95-MB-E3 or ILI95-S-E3).
UL
®
is a registered trademark of Underwriters Laboratories, Inc.

Honeywell Gamewell-FCI E3 Series Specifications

General

Brand	Honeywell
Model	Gamewell-FCI E3 Series
Category	Security System
Language	English