Honeywell Gamewell-FCI E3 Series - 6: ASM-16 Programming Address Switch Settings

E3 Series Installation/Operation Manual — P/N 9000-0574:I 11/04/10 143
ASM-16 Addressable Switch Connections E3 Series System Connections
3.9.6 ASM-16 Programming Address Switch Settings
Figure 3.9.6.1 illustrates the ASM-16 programming address switches.
NOTE: Set the first address in the program to switch 32.
.
Figure 3.9.6.1 ASM-16 Programming Address Switch Settings
Set this switch 6 UP when connected
to the ILI-MB-E3, ILI95-MB-E3 or ANX.
Set this switch 6 DOWN when
connected to the INI-VGC.