E3 Series Installation/Operation Manual — P/N 9000-0574:I 11/04/10 137
ASM-16 Addressable Switch Connections E3 Series System Connections
3.9 ASM-16 Addressable Switch Connections
The remote Addressable Switch (ASM-16) is an optional sub-assembly that may be programmed to
perform auxiliary switching functions. Connections are made to the following:
• ILI-MB-E3 or ILI95-MB-E3 TB3 to the ASM-16 TB1
• LCD-E3 J1 to the ASM-16 J2
The address of the ASM-16 in the system is set via a DIP Switch. Up to sixteen (16), ASM-16 sub-
assemblies can be installed. The first address must be set to Number 32.
For additional information on the connections and addressing information, refer to the ASM-16
Installation Instructions, P/N 9000-0550.
3.9.1 Specifications
The following list the electrical specifications for the ASM-16.
Operating Voltage: 24 VDC (from PM-9/PM-9G power supply)
Operating Current: 0.011 amp (with no LEDs lit)
Operating Temperature: 32° to 120° F (0° to 49° C)
Relative Humidity: 0 to 93%, non-condensing at 90° F (32° C)
Supervised
Power-limited
To Next Page
Loading...
