To Next PageTo Next Page
Need help?Do you have a question about the Honeywell FocusPRO 5000 and is the answer not in the manual?
General| Display | Digital |
|---|---|
| Power Source | Battery or Hardwired |
| Stages | 1 Heat/1 Cool |
| Backlit | Yes |
| Changeover | Manual |
| Temperature Control | ±1°F |
| Hold Feature | Yes |
| Filter Change Alert | Yes |
| Compatibility | Heat Pump |
| Type | Programmable |
| Display Size | Large |
| Temperature Range (Cool) | 50°F to 99°F |
| Terminal Designations | R, C, W, Y, G |
| Programming | 7-day programmable |
Press to select the function displayed just above each button. Functions change depending on the task.
Protects the compressor by delaying restart after shutdown to prevent damage.
Instructions for replacing AA or AAA alkaline batteries, typically done annually or when low.
Caution against operating cooling when outdoor temperature is below 50°F (10°C) to prevent damage.
Check circuit breaker, power switch, furnace door, and battery installation.
Verify settings, temperature, circuit breaker, power switch, furnace door, and wait time.
