EasyManua.ls Logo

Honeywell Galaxy Dimension - System Setting Procedures; Entering User PINs; Setting Groups

Honeywell Galaxy Dimension
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
SETTING THE SYSTEM
Before Setting
Before setting the system ensure all doors and windows are secured
and areas protected by movement detectors are free from obstruction.
Entering A Pin - User Type 2.1 - 2.2
As each digit is entered the keypad responds with a bleep and displays
a *. When all the digits are entered, press the ent or A > key to start the
setting routine.
Entering A Pin - User Type 2.3 - 3.6
As each digit is entered the keypad responds with a bleep and displays
a *. When all the digits are entered press the A > key to start the setting
routine.
Setting groups
Where group choice has been assigned to the PIN, select which groups
have to set as part of the setting routine. The set status of each group is
displayed on the keypad screen. Possible status options are :-
R = Ready (Groups is unset, and all zones are closed)
F = Faulted (Group is unset, and at least one zone is open)
S = Set (Group is set)
L = Lockout (Group is locked out, and cannot be unset)
Select which groups have to be to set by entering the number of the
group. For example, to set groups 2 and 3 press keys 2 and 3 . The
display changes to indicate the groups selected for setting. Pressing
the ent key starts the setting routine for the specified groups.
The larger Galaxy systems have more than 8 groups. If the user has
group choice, the available groups will be displayed at the keypad
following a valid code + A >. The groups will be displayed showing
A1 to A8. Use both A > and < B keys to scroll to the various sets of
groups. If the user does not have group choice, entering the PIN and
A > will cause all groups assigned to the user to set.
Exit time
If all the system zones are closed when the setting routine is started,
the display indicates the remaining time, in seconds, to vacate the
premises. Exit the building using the agreed route.
TIMED SET 120
Code + ent
Code + A
SET A12345678
Groups UUU-----
SET A12345678
Groups SUU-----
TIMED SET 120
Code + A
1
ent
SET A12345678
Groups USS-----
SET B12345678
Groups USS-----
TIMED SET 60
Code + A
A Key
ent

Table of Contents

Other manuals for Honeywell Galaxy Dimension

Related product manuals