Honeywell Genesis 7580G Get Started

Get started
Welcome
Thank you for your purschase of a Honeywell barcode scanner from Onslip! In this guide we will
help you connect your scanner to your computer for registering products, and connect to cash
register for usage.
Connect to computer
For adding barcodes of your products on Backoffice, connect your scanner to any available USB
port on your computer. Scan the barcode below. To the left of the barcodes you will find
information of what barcode to scan for your specific device. To identify the product name of the
scanner you received please see the first page of this guide.
This code is specific for Windows.
Only applies to Genesis 7580g.
This code is specific for Mac computers.
Only applies to Genesis 7580g.
Code applies to both windows and mac
computers.
Only applies to Hyperion 1300g.
Now you can scan the barcodes for when you change products in Backoffice. The barcode field is
automatically filled in with the code you scan.
Any questions so far? Please visit our support page for FAQ information at
http://support.onslip.com/.
2

Honeywell Genesis 7580G Specifications

General

Type	Fixed bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-70 - 70 °
Motion tolerance (cm/s)	200
Light levels (direct sunlight)	0 - 100000 lx
Standard interfaces	USB, RS-232, RS-485, Keyboard wedge
Product color	Black, Silver
Input voltage	5.5 V
Power consumption (standby)	0.5 W
Power consumption (typical)	2 W
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	80 mm
Width	83 mm
Height	150 mm
Weight	340 g