Honeywell Genesis 7580G Get Started

Connect to cash register
When you are done adding barcodes for your products
in Backoffice you are ready to connect the scanner to
your cash register. Scan the barcode to the right and
remove the USB cable from your computer.
Connect the USB cable to any free UBS slot on the cash register. If you are using a tablet as the
cash register connect the USB cable to the integration module provided in your cash register
package.
On the cash register press the menu button at the top left corner and choose Settings and
then devices. Press the icon on the top right and in the menu choose Connect Automatically.
Make sure you see the barcode scanner as a blue "button". Close the window and the settings
are automatically saved.
Your barcode scanner is now configured to your cash register and you can begin to use it.
Any questions? You are welcome to visit our support page online for more information.
http://support.onslip.com/
We have FAQs on all our compatible devices and more.
We hope you will enjoy your new barcode scanner.
3

Honeywell Genesis 7580G Specifications

General

Type	Fixed bar code reader
Sensor type	-
Scanner type	1D/2D
Pitch reading angle	-70 - 70 °
Motion tolerance (cm/s)	200
Light levels (direct sunlight)	0 - 100000 lx
Standard interfaces	USB, RS-232, RS-485, Keyboard wedge
Product color	Black, Silver
Input voltage	5.5 V
Power consumption (standby)	0.5 W
Power consumption (typical)	2 W
Storage temperature (T-T)	-40 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	80 mm
Width	83 mm
Height	150 mm
Weight	340 g