To Next PageTo Next Page
Need help?Do you have a question about the Honeywell Gent Vigilon and is the answer not in the manual?
General| Event Log Capacity | Up to 10, 000 events |
|---|---|
| Enclosure Rating | IP30 |
| Type | Fire Alarm Control Panel |
| Max Number of Loops | 4 |
| Battery Backup | 24V DC sealed lead-acid batteries |
| Display | LCD |
| Dimensions | Varies depending on the panel configuration |
| Compliance | EN54 |
Installation of second fix items after major building work is complete.
Installer responsibility to provide adequate fixtures and fittings based on product weight and size.
Ensuring correct cable type installation according to drawings and standards.
Mains supply connection via unswitched 5A fused spur unit with disconnect device.
Physical separation of outgoing and return loop cables to minimise damage risk.
Consideration for lightning protection devices on external loop cables.
Fire resisting cable classifications (PH30, PH120) and testing according to EN50200.
Standard fire resisting type meeting PH30 classification for mains supply.
Maximum 1Km cable distance for repeat indicator to panel connection.
Approved EMC compliant cables for loop wiring with specific types listed.
Approved EMC compliant cables for loop wiring with specific types listed.
Cable reference for 2.5mm² loop cable, extending loop length to 2.5Km.
Approved EMC compliant cables for network connections, including distance and core details.
Approved EMC compliant cables for network connections, including distance and core details.
Specific network cable from Prysmian (formally Pirelli) for panel to network node connections.
Specific network cable from Prysmian (formally Pirelli) for panel to network node connections.
Specific armoured network cable from Prysmian (formally Pirelli) for panel to network node connections.
Details on the Vigilon Loop Card (VIG-LPC-EN) and its capabilities.
Definition and calculation of loop cable length, including spur circuits.
Calculations for loop device load and length for 2Km loop cards.
Characteristics of alarm loads distributed evenly along the loop cable.
Characteristics of alarm loads grouped together on a loop circuit.
List and description of various addressable devices used in the Vigilon system.
Details on conventional products connecting to interface inputs.
Description of available slots for various interface cards like MCC, IO, and Loop cards.
Configuration and limitations for RS232 and RS485 communication ports.
Information on front panel controls, indicators, and access levels.
Description of system menus and the types of logs available (Active, Historic, Event, Fire).
Specifications for mains voltage, input current, and protective fuses.
Nominal and EN54 Part 4 data for battery charging currents for VIG1-24 and VIG1-72.
Specific EN54 Part 4 data including quiescent and alarm loop currents.
Specifications and mounting options for the VIG1-72 battery box.
Description of rack mounting frames for panel and battery box installation.
Methods for terminating MICC and softskin cables on panel enclosures.
Warning against high voltage insulation tests on connected cables.
Installation requirements for mains and battery supply cables before commissioning.
Illustrations of network connections between control panels and network nodes.
Recommendations for network wiring, emphasizing EMC compliant cables.
Overview of domain bridging techniques: RS232, modem, fibre optics, NPORT.
Illustration of a star connection topology for domain bridging.
Details on the S-Quad base, IP21 gasket, and optional labels.
Description of S-Quad LED indicators and the function of the dust cover.
Tools and procedures for removing and fitting the S-Quad device head.
Tools for fitting and removing the S-Quad sensor dust cover.
Details on Vigilon network nodes and domain bridge products like NPORT and modems.
Information on available printer types and system manuals.
