Need help?Do you have a question about the Honeywell Gent VIGPLUS-72 and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | Gent VIGPLUS-72 |
| Category | Fire Alarms |
| Language | English |
Defines responsibilities for system design, installation, testing, and maintenance.
Explains the control panel's role in monitoring devices and indicating events.
Details the message display and accessible controls on the control panel's front door.
Describes the function of various indicators like FAULT, FIRE, POWER, and others.
Describes controls for cancelling buzzer, silencing alarms, and resetting the system.
Details the Verify button for alarm delay and U1-U4 for custom tasks.
Steps to activate user-defined tasks using the U1 to U4 buttons.
Guide to testing the system using a manual call point and verifying alarms.
Explains how to cancel buzzer, silence alarms, reset the system, and record the event.
Steps to manually activate a fire alarm by breaking the glass of a manual call point.
Details actions to cancel buzzer, silence alarms, and reset the system after a manual fire alarm.
Describes automatic sensing of fire and panel response with sounders.
Explains how to cancel buzzer, silence alarms, and reset after automatic fire detection.
Explains the Verify button to delay sounders for alarm investigation.
Details what causes faults and how they are indicated on the control panel.
Emphasizes that fault repairs must be performed by trained engineers.
Details fault messages related to FARE, mains supply, and battery issues.
Explains fault messages for loop problems, device communication, and wiring issues.
Detailed steps for safely replacing the glass cover of a manual call point.
Procedure to access the repair function for system faults, typically requiring a password.
To Next Page