Honeywell GLEN ALDEN - Hanging Your Fan

Bracket Screw
Tab
Screw Hole
Slot
6
4. Remove the four bracket screws from underneath
the lower mounting bracket and save for later use
(Fig. 4).
Bracket Screw
Bracket Screw
Washer
Washer
Fig. 4
Fig. 5
HANGING YOUR FAN
Bracket
Screw
6. Reinstall the previously removed bracket screws
underneath the lower mounting bracket and into
the upper mounting bracket. Securely tighten the
screws (Fig. 6).
Fig. 6
5. Place tab on the lower mounting bracket into slot in
the upper mounting bracket. Then slide the second
lower mounting bracket tab into the second slot
on the upper mounting bracket until all four screw
holes are in alignment (Fig. 5).