Honeywell HC60WB5R5 - Figure 6-11 SNMP Configurations

Configuring Network Settings
53
Figure 6-11 SNMP Configurations
Enable SNMPv1, SNMPv2c: Check to enable SNMPv1, SNMPv2c.
Enter the names of Read/Write community and Read Only community according to your NMS
settings.
Enable SNMPv3: Check to enable SNMPv3 which contains cryptographic security, a higher
security level.
• Security name: Choose Read/Write or Read Only and enter the community name
according to your NMS settings.
• Authentication type: Select MD5 or SHA as the authentication method.
• Authentication password: Enter the password for authentication (at least 8 characters).
• Encryption password: Enter a password for encryption (at least 8 characters).