Operation SDC / DHC
40 EN2H-0220GE51 R1111
Switching time programming (program P2 and P3 enabled)
Upon accessing the menu-selection level, the "Timeprograms"
menu always appears first. Enabling of programs P2 and P3 in
the "System Parameters" menu (see 4.2 Menu-selection level,
pg. 31).
Select
heating circuit:
Select day
and cycle:
Select
program:
Change:
Change:
Temperature
End of
heating
Monitoring
Start of
heating
Mo-
Hcy-1
HC
P1 P2 P3
MC -1 MC -2 DHW
Mo-
Hcy-2
Mo-
Hcy-3
Only appears if there are switching
times in the second heating cycle
Tu-
Hcy-1
Su-
Hcy-3
Default
time
We
Th
Fr
Sa
Copy day
Return:
Return to the basic display:
3 s
Copy
circuit
Change:
HC Direct heating circuit
MC-1 Mixed heating circuit 1
MC-2 Mixed heating circuit 2
DHW Hot-water heating circuit
Hcy Heating cycle
To Next Page
Loading...
