Performance Series Network Video Recorder User Guide
186
Figure 12-56 UPnP Configuration Interface
2. Configure the following settings:
Enable Click to enable or disable UPnP.
LAN IP Enter the NVR’s IP address from the TCP/IP page.
WAN IP Enter the router’s IP address.
3. (Optional) Edit a mapping relationship from the Port Mapping List:
Edit a mapping relationship: Click the modify icon for the mapping relationship that you
want to edit, and then, in the Modify dialog box, edit the Service Name, Protocol, Internal
Port, and/or External Port details, as needed, and then click OK.
4. Click OK to save your settings.
Configuring SNMP
SNMP allows the communication between the network management work station software
and the proxy of the managed device. It is reserved for a third party developer.
1. Click SNMP under NETWORK to open the SNMP configuration interface.
2. Configure the SNMP settings and click OK to save your settings.
To Next Page
Loading...