8
Settings: COOL, DRY, FAN and HEAT*.
The corresponding indicator light will illuminate to indicate the current mode setting.
MODE CONTROL
Air Conditioning Mode (COOL)
Adjust fan speed and air temperature to suit your desired comfort level.
Temperature setting range is 16°C - 32°C (60°F - 90°F).
•
Dehumidifying Mode (DRY)
Fan speed is preset to LOW.
Note: If the unit will be used mainly as a dehumidifier, do not connect the exhaust hose. Continuous
drainage is then necessary (refer to Continuous Draining for Dehumidifier Mode).
•
Fan Mode
For air circulation without air conditioner cooling.
•
Heating Mode* (HEAT)
In this mode, the desired temperature can be set between 16°C - 32°C (60°F - 90°F). When in heating
mode condensation must be drained from the lower drain plug.
Note: The exhaust hoses must vent outside the room when using heating mode.
•
USE & OPERATION (CONTINUED)
FUNCTION BUTTONS (CONTINUED)
3 settings: High, Medium and Low.
FAN SPEED CONTROL
EN
*Applicable for models with Heating feature only.
To Next Page
Loading...
Need help?
General
