Honeywell HRG4 - 8 Network Settings; Configuring Network Settings; Configuring General System Settings; Figure 8-1 Network Settings Menu

800-12005V1 - A - 08/2012
8
Network Settings 8
This chapter covers how to configure network settings.
Configuring Network Settings
The network settings must be configured if the HRG DVR is used for monitoring over a network.
Configuring General System Settings
To configure the general network settings:
1. Click Menu  Settings  Network to enter the Network Settings menu (see Figure 8-1).
Figure 8-1 Network Settings Menu
2. Select the General tab. Configure the settings on the interface.