Need help?Do you have a question about the Honeywell HRGX45 and is the answer not in the manual?
General| Model | HRGX45 |
|---|---|
| Hard Drive Capacity | Up to 6TB |
| Operating System | Embedded Linux |
| Video Compression | H.264 |
| Remote Viewing | Yes |
| Motion Detection | Yes |
| Type | Digital Video Recorder (DVR) |
| Video Inputs | 4 Channels |
| Hard Drive Support | 1 |
| Audio Input | 1 |
| Audio Output | 1 RCA |
| Playback Channels | 4 Channels |
| Network Connectivity | Yes |
| Remote Access | Yes |
| Network Interface | Ethernet |
| USB Ports | 2 |
| Power Supply | 12V DC |
Overview of the HRGX DVR's key features and capabilities, including video compression and dual-stream support.
Illustrates and describes the front panel components of the HRGX DVR, including buttons and ports.
Illustrates and describes the rear panel connectors and ports of the HRGX DVR for various connections.
Explains basic mouse operations for setting up and operating the HRGX DVR interface.
Details the layout and functions of the IR remote control for DVR operation.
Important safety and environmental guidelines to follow during DVR installation.
Instructions for connecting cameras, monitors, audio devices, and network equipment.
Procedures for correctly powering the DVR on and off to ensure longevity.
Guides through the initial DVR setup process using the on-screen wizard.
Steps to navigate and open the main menu interface on the DVR.
How to configure the DVR's date and time for accurate event stamping.
Instructions for updating the DVR's firmware via USB or FTP for new features and fixes.
Table estimating storage space usage based on recording bit rate per channel.
Describes the DVR's default live view mode and on-screen notifications.
How to customize screen layout and video output modes for live viewing.
Explains how to switch channels, manage main/aux output, and use digital zoom.
Introduces controlling PTZ cameras via the DVR's on-screen interface.
Steps to configure PTZ connection settings, presets, patrols, and patterns.
How to save specific camera positions as presets for quick recall.
How to program camera movement sequences between presets.
How to record and play back sequences of PTZ movements.
Instructions to activate programmed presets, patrols, and patterns.
How to manually start/stop recording or initiate all-day recording from live view.
Setting up scheduled recording times for channels based on days and event types.
How to manually start or stop recording for specific channels or all channels.
Setting up special recording schedules for holidays.
Defining stream types, resolution, bitrate, and frame rate for recording.
Setting up dual recording to a second HDD for redundancy.
Methods to lock files or set HDDs to read-only to prevent overwriting.
How to find and play recorded video from a specific channel.
Searching and playing back video based on date and time criteria.
Finding and playing video recorded during alarm input or motion detection events.
Locating video segments marked with specific tags.
Information on searching and exporting system log files.
Covers creating video clips and working with tags during playback.
How to export recorded video files to external storage devices.
How to export customized video clips created during playback.
Setting up alarm input types and defining alarm response actions.
Configuring dwell time and arming schedules for alarm outputs.
Setting up motion detection areas, sensitivity, and alarm responses.
Enabling and configuring settings for detecting video tampering events.
Enabling and configuring settings for detecting video loss events.
Configuring alarm responses for device exceptions like HDD errors or network issues.
Setting up the DVR to send email notifications for alarms and exceptions.
Configuring the DVR to send notifications to a remote alarm host.
Basic network configuration like IP, DHCP, MTU, and ports.
Covers PPPoE, DDNS, NTP, SNMP, UPnP, and Multicast configurations.
Instructions for setting up PPPoE for network connections.
How to configure Dynamic DNS for network access.
Setting up Network Time Protocol for accurate date and time synchronization.
Enabling and configuring SNMP for device status and parameter information.
Enabling Universal Plug and Play for seamless network device discovery.
Configuring multicast for simultaneous live video stream views over a network.
Monitoring network traffic, testing delay, and exporting packets.
Checking the operational status of installed hard disk drives.
Instructions for connecting NAS or SAN devices to expand storage.
Managing multiple HDDs and setting their properties (R/W, Read-only, Redundancy).
Limiting HDD capacity usage for individual cameras.
Performing self-tests on HDDs to assess their health.
Detecting and potentially repairing bad sectors on hard disk drives.
Setting up alarms for HDD full status or errors.
Customizing on-screen display text like date, time, and camera name.
Adjusting image parameters like brightness, contrast, and hue for different lighting conditions.
Creating privacy zones to conceal specific areas in the camera view.
Setting up general system parameters like language, resolution, and date/time.
Accessing detailed information about the DVR, cameras, and system status.
Searching, viewing, and exporting operation, alarm, and exception log files.
Backing up and restoring DVR configuration settings.
Procedures for updating the DVR's firmware.
Resetting the DVR to its factory default configuration.
Explains the different user account types (Administrator, Operator, Guest) and their permissions.
Steps to create new operator or guest user accounts.
How to modify user permissions and account details.
Procedure for removing created user accounts.
How to change the administrator password for enhanced security.
To Next Page
