Honeywell HRGX45 User Manual

www.honeywell.com/security
132 | HRGX DVR User Manual
Configuring General System Settings
Follow the instructions below to configure general system settings, including video output
standard, system date and time, daylight saving time (DST) settings, device name and number,
video output brightness, main monitor output, and operation timeout parameters.
To configure general system settings:
1. Go to Menu > Settings > General > General.
2. Configure the following settings:
• Language Default language is English. Not user-configurable.
• CVBS Output Standard Sets the CVBS output standard. Select NTSC or PAL . Must
be same as the video input standard.
•Resolution Sets the VGA/HDMI output resolution. Select
1024×768/60HZ , 1280×720/60HZ , 1280×1024/60HZ , or
1920×1080/60HZ (1080P) . Must be same as monitor screen
resolution.
•Time Zone Sets the time zone. Select your time zone from the list.
• Date Format Sets the date format. Select MM-DD-YYYY , YYYY-MM-DD , or
DD-MM-YYYY .
• System Date Sets the system date. Click the calendar icon to display the
on-screen calendar, and then select the current date.
• System Time Sets the system time. Click the clock icon, and then enter the
current time (hh:mm:ss).
• Mouse Pointer Speed Sets the mouse pointer speed. Drag the slider to select the
desired speed. 4 levels configurable.
•Enable Wizard Enables/disables setup wizard. Select the check box to
enable the wizard; clear the check box to disable it.
• Enable ID Authentication Enables/disables login password. Select the check box to
enable the login password; clear the check box to disable it.

Honeywell HRGX45 Specifications

General

Brand	Honeywell
Model	HRGX45
Category	DVR
Language	English