Getting Started | 31
800-16694 - A - 04/2014
11. Motion detection is disabled for all channels by default. Click the channel(s) that you want
to enable motion detection for, or click Analog to select all channels, and then click OK.
Accessing the Main Menu
Use the following procedure to access the main menu.
To access the main menu:
1. In live view mode, right-click anywhere on the main monitor screen to display the shortcut
menu, and then click Menu.
2. If prompted, enter the DVR’s admin password, and then click OK. The default admin
password is 12345.
3. In Menu, click the submenu you want to open: Clip Search, Manual, HDD, Record,
Camera, Settings, Maintenance, or Shutdown.
To Next Page
Loading...
