Viewing Live Video | 37
800-16694 - A - 04/2014
Configuring Live View Settings
Setting the Screen Layout
The live view interface is configurable as a single channel for multiple camera display (4, 8, or
16 channels depending on your DVR model).
To display video from a single channel full screen:
• Double-click the channel that you want to view full screen.
• Right-click anywhere on the screen to display the shortcut menu, click Single Screen, and
then click the channel you want to view from the list (for example, "Camera 03").
Note You can alternate between single channel (full screen) and multi-channel display
modes by double-clicking the left mouse button. In full screen mode, use the
scroll wheel on the mouse to switch between channels. Moving the scroll wheel
up displays the previous channel and moving the scroll wheel down displays the
next channel.
To display video from multiple channels simultaneously:
1. Right-click anywhere on the screen to display the shortcut menu, and then click
Multi-screen.
2. Select a display mode from the list (the options will vary depending on the number of
channels your DVR supports).
Setting the Video Output Mode
There are four video output modes in live view: Standard, Bright, Gentle, and Vivid. The default
output mode is Bright.
To change the video output mode, right-click anywhere on the screen to display the shortcut
menu, click Quick Set, click Output Mode, click the output mode you want, and then click OK.
To Next Page
Loading...
Need help?
General