www.honeywell.com/security
144 | HRGX DVR User Manual
Adding Users
You can add multiple operator or guest user accounts.
To add a user:
1. Go to Menu > Settings > User.
2. Click Add to open the Add User window.
3. Configure the following settings:
4. Click OK to save your settings and close the window. The user is added to the list of users.
•User Name
Enter the user name.
•Password
Enter the password.
•Confirm
Re-enter the password.
• Level
Select
Operator
or
Guest
.
•User’s MAC Address
If the user is logging in to the DVR remotely, enter the MAC
address of the user’s PC. The user must log in from this MAC
address to access the DVR.
To Next Page
Loading...
