www.honeywell.com/security
50 | HRGX DVR User Manual
Programming Patterns
You can record a set of PTZ movements as a pattern. When you call the pattern in live view
mode, the PTZ camera will automatically follow the path you have defined. You can program up
to 3 patterns.
To program a pattern:
1. Go to Menu > Camera > PTZ > More Settings.
2. Select the pattern you want to program from the pattern list (Pattern 1, Pattern 2, or
Pattern 3).
3. Click the Record button .
4. Drag the mouse over the live image, or, alternatively, use the direction buttons, to define
the desired path of the PTZ camera.
5. Click the Save button to save the path as the selected pattern.
6. Repeat steps 2 to 5 to save more patterns.