Controlling a PTZ Device | 51
800-16694 - A - 04/2014
Calling Presets, Patrols, and Patterns
This section describes how to call pre-programmed presets, patrols, and patterns in live view
mode and within the PTZ configuration interface.
Calling Presets
To call a preset in live view mode:
1. Click on a channel to display the quick setting
toolbar (see
Quick Setting Toolbar, page 35
).
2. On the toolbar, click the PTZ Control button .
3. In the on-screen PTZ control interface, under
Camera, select your PTZ camera from the list.
4. Click Preset to view the list of presets, and then
click the preset you want to call.
To call a preset in the PTZ configuration interface:
1. Go to Menu > Camera > PTZ > More Settings (or click Configuration in the PTZ
control interface).
2. Click Call Preset, and then click the number of the preset you want to call.
To Next Page
Loading...
Need help?
General