www.honeywell.com/security
52 | HRGX DVR User Manual
Calling Patrols
To call a patrol in live view mode:
1. Click on a channel to display the quick setting
toolbar (see
Quick Setting Toolbar, page 35
).
2. On the toolbar, click the PTZ Control button .
3. In the on-screen PTZ control interface, under
Camera, select your PTZ camera from the list.
4. Click Patrol to view the list of patrols, and then
click the patrol you want to call.
5. Click the start button
to start the patrol. To stop
the patrol, click the stop button .
To call a patrol in the PTZ configuration interface:
1. Go to Menu > Camera > PTZ > More Settings (or click Configuration in the PTZ
control interface).
2.
Select the patrol you want to call from the drop-down list, and then click the
Run
button
to call the patrol. To stop the patrol, click the
Stop
button
.
To Next Page
Loading...
Need help?
General