Honeywell HRGX45 User Manual

www.honeywell.com/security
96 | HRGX DVR User Manual
Configuring Exception Settings
In addition to configuring alarms for sensor, motion detection, video tampering detection, and
video loss events, you can also configure alarms for device exceptions, such as hard drive
errors and network problems.
To configure exception settings:
1. Go to Menu > Settings > Exceptions.
2. In the Exception Type drop-down list, select one of the following exceptions, or select All:
3. Select one or more of the following alarm responses for the exception(s):
4. Click Apply to save your settings.
• HDD Full The DVR’s hard disk drive (HDD) is full.
• HDD Error The HDD has experienced a writing or formatting error.
• Network Disconnected The network cable is disconnected.
•IP Conflicted There is an IP address conflict.
• Illegal Login An incorrect user name or password was entered.
• Input/Output Video
Standard Mismatch
Input/output video standards do not match.
•Record Exception There is no space to save a recorded file.
•Audible Warning
• Notify Surveillance Center
(Not available for Network Disconnected or IP Conflicted)
•Send Email
•Trigger Alarm Output

Honeywell HRGX45 Specifications

General

Brand	Honeywell
Model	HRGX45
Category	DVR
Language	English