www.honeywell.com/security
106 | Performance Series HQA Digital Video Recorder User Guide
Configuring General System Settings
Configuring Device Settings
To configure general settings
1. Go to Main Menu > Setting > System > General > General.
2. On the General tab, configure the following settings:
• Device ID
Enter a device name for the DVR.
• Device No.
Enter a device number for the DVR.
• Language
Set the language of the user interface.
•Video Standard
Set the video standard to
NTSC
or
PAL
.
• HDD Full
Set to
Overwrite
to continue recording when the HDD is full. Set to
Stop Record
to stop recording when the HDD is full. The default
setting is
Overwrite
.
•Pack Duration
Set the recording duration. Specify a time between
1
and
60
minutes.
The default setting is
60
min
.
•Realtime Play
Set the length of time to play back video using the realtime playback
function in live view mode. Specify a time between
5
and
60
minutes.
The default setting is
5 min
.
To Next Page
Loading...