www.honeywell.com/security
46 | Performance Series HQA Digital Video Recorder User Guide
Manual Record Settings
In live view mode, you can manually record a clip directly to a connected USB storage device.
To record a video clip in live view mode
1. Connect a USB storage device (such as a USB flash drive) to one of the USB ports on the
DVR.
2. The Find USB device dialog box opens automatically. Right-click to close the window.
3. In live view mode, move the mouse pointer to the top of the channel window to display the
camera toolbar (see Camera Toolbar on page 32).
4. On the camera toolbar, click the Realtime Backup button to start recording. The
button changes to green while the DVR is recording.
5. Click the Realtime Backup button again to stop recording.
The video clip is saved automatically to the connected USB storage device. The file name
uses the following format: [DVR name]_[channel]_[video stream]_[recording start
time]_[recording end time]).dav.
To Next Page
Loading...