www.honeywell.com/security
30 | Performance Series HQA Digital Video Recorder Remote User Guide
Version
Click Version to open the Version configuration interface.
Figure 2-3 Version Configuration Interface
Here you can view the recording channel, the alarm input/output information, the software
version, and the release date. None of these values can be changed; they are viewable only.
Log
Click Log in the Info menu to open the Log configuration interface.
Figure 2-4 Log Configuration Interface
Table 2-4 Log Configurations
Configuration Description
Start Time Set a start time for the log.
End Time Set an end time for the log.
Type Select from System Operation, Configuration Operation,
Data Operation, Event Operation, Record Operation, User
Management, Log Clear, and All.
Search Click Search to find a log or logs that fit the search
requirements (Begin time, End time, and Type).
You can click Stop to terminate the current search.
To Next Page
Loading...
