www.honeywell.com/security
64 | Performance Series HQA Digital Video Recorder Remote User Guide
Figure 3-36 Connection Interface
See that the HTTPS value is 443.
Login Configurations
1. Open the browser, then enter https://xx.xx.xx.xx:port, where xx.xx.xx.xx is your device’s
IP or domain name.
The port is your HTTPS port. If you are using 443 (the default HTTPS value), then you do
not need to add port information here.
2. Enter https://xx.xx.xx.xx to access.
If you have the correct settings, then you should see the login interface.
Configuring Event Settings
Configuring Video Detection
Configuring for Motion Detection
You can configure the system to generate a motion detection alarm when the minimum amount
of motion (as defined by you) is detected in the video.
Click Video Detect in the Event configuration interface to open the Video Detect configuration
interface.
To Next Page
Loading...
