Honeywell HVC0001 Quick Start Guide

HVC0001/HVC0002 69-2319EFS-01 2009-03-24 1/6
Mode
Menu
Time
Menu
Configuration
Menu
Program +
Menu
Set Hour Set Minutes Set Year
Set Month
Set DaySelect 24H or 12H
Set Daylight
Saving Time
Set Backlight
(3 sec.)
Briefly press this button to go
to preceding menu or setting.
Briefly press this button to
go to next menu or setting.
Briefly press this button to accept
setting and display next parameter.
Press this button for 3 seconds
to enter or exit the setup menus.
The default settings are shown on the flowchart.
After 5 sec.
ASHRAE 62.2
Program Mode
Daily On/Off
Program Mode
Manual
Mode
Customized Cycle
Program Mode
if the controller is in
Daily On/Off Program Mode
Set On Time
Set Off Time
if the controller is in
Customized Cycle Program Mode
Set Countdown
Time (minutes)
Countdown Mode
is activated
Set Run Time
Set Idle Time
+ The Program Menu is available
only if the controller is in
Daily On/Off Program Mode or
Customized Cycle Program Mode
At end of Countdown Mode
Normal Operation
Display
The controller automatically exits the setup menus
if you do not press any button for 60 seconds.
HVC0001/HVC0002
Menu flowchart
ENGLISH
400-305-001-A (69-2319EFS-01).fm Page 1 Tuesday, March 24, 2009 2:55 PM

Honeywell HVC0001 Specifications

General

Brand	Honeywell
Model	HVC0001
Category	Controller
Language	English