Honeywell HCC80 User Manual

HCE80(R) / HCC80(R)
Mounting and operation
Montage en bedrijf

Honeywell HCC80 Specifications

General

Brand	Honeywell
Model	HCC80
Category	Controller
Language	English

Summary

Introduction to the Underfloor Heating Controller

System Overview of Compatible Devices

Mounting and Installation Guide

Installing the Underfloor Heating Controller

Instructions for mounting the underfloor heating controller, including wall and DIN rail installation.

Settings at the Underfloor Heating Controller

Cabling Guidelines for the Controller

Guidelines for connecting cables to the underfloor heating controller and its components.

Commissioning the Underfloor Heating System

Connecting Devices and Binding Procedures

Binding Room Sensors with Evohome Controller

How to link evohome controllers with room sensors for zone control.

Binding Room Setpoint Generator/Sensor (HCW82/HCF82)

Binding Room Thermostat (DTS92)

Binding Controller with Evohome System

Binding CM927 Device to Heating Controller

Guide to connect the CM927 device to the underfloor heating controller.

Binding Controller Without Time Program

Help with Problems and Troubleshooting

Changing the Fuse in the Controller

Step-by-step guide on how to replace a blown fuse in the controller.

Restoring Factory Settings

Instructions for resetting the controller to its default factory configuration.

Understanding Fault Displays and LEDs

Errors and Elimination Guide

Troubleshooting guide for common problems and their solutions.