Honeywell HCE 80 User Manual

HCE 80/HCE 80R
HCC 80/HCC 80R
Underfloor Heating
Controller
Installation and Operation
Zoneregelaar
Montage en gebruik

Honeywell HCE 80 Specifications

General

Brand	Honeywell
Model	HCE 80
Category	Controller
Language	English

Summary

General safety instructions

Creating a zoning plan

Specifying temperature zones

Installation

Installation and configuration

Setting the thermal actuator type

Explains how to configure the type of thermal actuator used.

Cabling connections

Details various cabling aspects.

Permissible cable types and lengths

Specifies allowed cable types and their maximum lengths.

Connecting power cable

Guides on connecting the main power supply cable.

Connecting the thermal actuators

Instructions for wiring the thermal actuators.

Boiler feedback

Details on connecting boiler feedback systems.

Connecting the boiler feedback via an analog output (only HCE 80/HCC 80) to external controllers

How to connect boiler feedback using analog output.

Implementing a boiler feedback via a wireless connection (with HC60NG/R6660D)

Implementing a boiler feedback with an integrated relay 42 V AC, floating contact (only HCE 80R/HCC 80R)

Commissioning

Commissioning the underfloor heating controller

Steps to commission the underfloor heating controller.

Checking the signal strength of the radio transmission

Assigning room names

Assigning zones and allocating room names (teach-in)

Guides on assigning zones and room names using teach-in.

Allocating the setpoint adjuster HCW 82, room temperature sensor HCF 82

How to assign setpoint adjusters and sensors to zones.

Allocating Hometronic Manager HCM 200D

Assigning the Hometronic Manager device to zones.

Assigning the room control system CM67z

Procedures for assigning the CM67z room control system.

Teach-in room temperature sensor

Teach-in time program CM67z (Zone 1)

Teach-in time program CM67z (Zone 2)

Time program for cooling function

Allocating relay modules for controlling the heat generator

Teach-in for boiler feedback HC60NG/R6660D

How to teach-in boiler feedback from HC60NG/R6660D.

Saving the settings on the Hometronic Manager

Checking the configuration

Checking radio transmission

Sending test signals

Receiving test signals

Displaying faults

Completing commissioning

Resetting underfloor heating controller to state of delivery

How to reset the controller to its factory default state.

Changing the fuse

Appendix

Help with problems

Troubleshooting guide for common issues.

Technical data

Provides detailed technical specifications of the device.

Device and function definition in accordance with EN 60730-1