Need help?Do you have a question about the Honeywell HR 10 F and is the answer not in the manual?
General| Brand | Honeywell |
|---|---|
| Model | HR 10 F |
| Category | Controller |
| Language | English |
Technical terms are explained in the glossary; identified by an asterisk (*).
The Roomtronic HR10 F controls room temperature with a drive and operating unit.
Lists the items included in the product package: Operating unit, cable, drive unit, valve lantern, and batteries.
Consideration for mounting location based on temperature measurement influence.
Instructions for attaching the drive unit to the radiator valve.
Procedure to detach the drive unit from the valve lantern.
Attaching the valve lantern to the radiator valve, noting specific valve types.
Procedure to check the valve lift using the adjusting ring and spindle.
Connecting the drive unit housing to the valve lantern using the retainer bracket.
Steps for opening, preparing, and attaching the operating unit housing.
Connecting the operating unit to the drive unit via a cable.
Instructions for inserting batteries, including type and polarity.
Step-by-step guide to setting the date and time using the buttons and adjusting ring.
Identifies and explains the functions of the display and buttons on the operating unit.
How to adjust the room temperature using the adjusting ring.
Using the adjusting ring to fully open or close the heating valve.
Explanation of the three operating modes: Automatic, Manual, and Programming.
Steps to switch to manual mode using the AUTO/MANU button.
Instructions for entering programming mode for time program adjustments.
Details on the Window function, Protection against lime, and Anti-freeze.
How the device reacts to sudden temperature drops from open windows.
Mechanism to prevent lime deposits by periodically opening/closing the valve.
Function to prevent freezing by opening the valve below 6°C.
How to manually open or close the radiator valve when batteries are depleted.
Steps to activate child-proofing mode, disabling setpoint changes.
Defines Comfort/Economy temperatures and Heating/Economy periods for time programming.
Procedure to adjust the comfort and economy temperature settings.
Setting heating and economy periods for weekdays.
Method to set heating and economy periods for all days at once.
Method to set heating and economy periods for individual days.
Procedure to remove heating and economy periods.
Procedures for adapting the controller to the radiator valve.
Steps to initiate automatic adaptation after valve replacement.
Procedure for manual adaptation to resolve specific valve issues.
Provides specifications like operating range, voltage, and protection.
Diagram showing physical dimensions and mounting hole layout.
Lists available adapters for the drive unit with order numbers and usage.
Troubleshooting guide for common problems and error displays.
Definitions of technical terms used in the manual.
To Next Page